Series Heating Cables HE1 / HC3 / Ex-HC3

  1. Home
  2. >
  3. Products
  4. >
  5. Series Heating Cables HE1...

Features

Compliance STANDARDS: VDE 0253, UL 758, IEC / EN 60079 -0, IEC / EN 60079-7, IEC / IEEE / EN 60079 -30-1.
Approvals HE1/HC3 Cables: UL, VDE, EAC for use in safe area.

EX-HC3 Cable: IECEx, Baseefa, CSA Group, EAC, TI (ATEX) for Zone I / Division II, Central Institute of Mining and Fuel Research (CSIR-CIMFR), Dhanbad And certified by Petroleum & Safety Organization (PESO) / Nagpur, for Zone II for use in hazardous area.

Long life PTFE insulation used has excellent electrical properties fire resistant, inert to most chemicals, virtually non-ageing and can withstand high temperature continuously.
Range Wide Range of linear resistances per meter and can be designed for longer lengths.
Custom Built We also offer custom designs of a product to suit individual requirements. We can design for various dimensions, heat loads and voltages.

Specifications

SERIES CABLES HE1 CABLE HC3 CABLE EX-HC3 CABLE
Heating conductor As per the resistance range given

below.

As per the resistance range given

below.

As per the resistance range given below.
Insulation Fluoropolymer. Fluoropolymer. Fluoropolymer (with kapton tape)
Braid Coated Copper (Optional). Coated Copper. Coated Copper.
Outer Sheath Fluoropolymer. Fluoropolymer.
Supply Voltage 300/500V. 300/500V. Upto 750 VAC.
Power Output (W/m) Max. 30W/m.
Max. Operating Temperature 180oC 180oC 180oC
Max. Withstand Temperature 250oC 250oC 260oC
Temperature Classification T6 to T2.
Min Installation Temperature – 65oC
Mechanical Strengths Low Risk Mechanical damage 4J /

High Risk Mechanical damage 7J.

Min. Bending

radius

6 X Diameter of the cable. 6 X Diameter of the cable. 6 X Diameter of the cable.
Applications Heating mold. process heating requirements in Oil & Gas, Petrochemical, Power, Chemicals & Fertilizers, Metallurgical, Cement, Pharma, Food and Edible oil industries.

# Thermopads reserves the right to modify the specifications in line with future improvements, updated standards or updated certifications

Range

Standard Manufacturing linear resistances (ohms/KM) are as below and are supplied in reels of 500 to 1000M lengths 0.8/ 1.1 / 1.8 / 2.9 / 4.4 / 7 / 10 / 11.6 / 15 / 17.8 / 25 / 31.5 / 50 / 68 / 100 / 150 / 170 / 200 / 240 / 330 / 370 / 500 / 730 / 1000 / 1440 / 1730 / 2160 / 2400 / 3000 / 4000 / 5600 / 8000.

Wide Range of linear resistances per meter and can be designed for longer lengths.

Not sure where to start? Try our products

Our solution can find thermosystems products

REQUEST A CALL BACK