Hot Melt Hose

Hot Melt Hoses are used to feed the hot melt from the basic appliance to the applicator system, ensuring that the properties of the adhesive are preserved. The hot melt hoses are designed to last longer and guarantee a constant temperature over the full length to remain char free and prevent changes in the glue viscosity. The hot melt hoses are very flexible, can be laid out at will and serve to connect movable appliances systems. The Temperature should be controlled with temperature controller.
Optionally a bimetal is installed, which shuts off the energy supply to the heater when the maximum permissible temperature is reached. This bimetal may then be considered as a safety function and is used exclusively as a safety function.
The hot melt hose is usually the link between the hot-glue system and the application head or the handgun and is thus part of a machine.

Features
Compliance	Heating Cable used in the Hot Melt Hose meets all test requirements as per VDE / UL Standards.
Approvals	Heating Wires used in the Hot Melt Hose is certified by VDE & UL.
Flexibility	Constructed with silicon sponge and braided outer jacket, hence very flexible.
Precise Temperature Control	Inbuilt temperature sensor (RTD / Thermocouple / Temperature switch) provided with suitable external connection or precise temperature control.
Efficient	Heat reflective foil on the heating cable and process tube ensures efficient heat transfer.
Ready to use	Prefabricated with sample line and heating system incorporated, is ready to use.
Easy to install	No need of any fabrication and fixing, ready to use with required connectors and end connections. Therfore no need for any special tools, it is easy to install.
Custom built	We also offer custom designs of a product to suit individual requirements. We can design for various dimensions, heat loads and voltages

Specification
Item Description	Hot Melt Hose
Process Tube	SS Braided PTFE.
Process Tube Size	Up to 1/2^“ OD.
Heating Element	Constant watt type (Series/ Parallel).
Thermal Insulation	Silicon Foam & Polyurethane Foam.
Outer Jacket	Nylon Braided & Corrugated Flexible PA Conduit.
Operating Voltage	230V / 110V.
Maximum Wattage	Up to 200W/m.
Maximum Operating Temperature	200^oC
Temperature Sensor	built RTD / Thermocouple / Thermostat.
Process connection	Connector coupling / Flanged / as per customer requirement.
Power / Control Connection	2M of lead cable (3Wire) for both power and control.

# Thermopads reserves the right to modify the specifications in line with future improvements, updated standards or updated certifications

Hot Melt Hose

Features

Specification

Not sure where to start? Try our products