Self Regulating Thermo De-Icing Cable/Tracer

Self Regulating Thermo De Icing Cable/Tracer (TDIT-SR) is designed for various Domestic and Commercial De Icing application like Freeze protection of pipelines, vessel, and Snow and ice prevention on roofs, Gutters, Downspouts and so on.

Self Regulating Thermo De Icing Cable/Tracer (TDIT-SR) consists of a self-regulating parallel circuit of a semi-conductive heating core extruded over plated copper bus wires. Modified Polyolefin insulation over semi-conductive heating core provides electrical insulation, over which a metal braiding or Aluminum tape with earth drain wire metal sheathing is provided for earthing. An outer sheath of Modified Polyolefin makes the heating cable robust and water proof.

Self Regulating Thermo De Icing Cable/Tracer (TDIT-SR) is available factory terminated and as in continuous lengths on drums.

Self Regulating Thermo De Icing Cable/Tracer (TDIT-SR) is available in predetermined lengths with cold tail – prefabricated & tested in a carefully controlled factory environment.

Features
Compliance	Standards IEC 60800, IEC/EN 62395-1, VDE 0721-52
Approvals	SGS Fimko, EAC.
Cost-effective	Controlled and self-regulating type provides heat when required, resulting in optimal heat utilization and save on energy cost.
Reliability	A uniquely designed hot to cold junction makes the termination robust, IP Rating: IPX7 RoHS, REACH & UV Resistant.
Flexibility	Highly flexible and easy to install, does not require any special tools.
DIY	TDIT SR with clear instruction manuals makes it user-friendly.
Dimensions	9.75 mm x 5.5 mm
Custom-built	We also offer custom designs of a product to suit individual requirements. We can design for various dimensions, heat loads and voltages.

Specifications
Standard Wattage	10W/M, 15W/M, 20W/M, 25W/M & 30W/M, 230V
Maximum Wattage	33W/M, 230V
Standard Cold lead length	2 M

#Thermopads reserves the right to modify the specifications in line with future improvements, updated standards or updated certifications.

TDIT-SR Power Output Characteristics

Circuit Breaker Selection and Maximum Circuit Lengths @230 VAC

		Heating circuit length (m) with Type C circuit Breaker
		TDIT-SR-10		TDIT-SR-15		TDIT-SR-20		TDIT-SR-25		TDIT-SR-30
	Circuit Breaker size (Amps)	10	16	10	16	10	16	10	16	10	16
Switch-on temperature (°C)	10^OC	122	135	90	115	72	100	60	92	52	84
	-15^OC	105	125	70	100	57	91	46	75	40	63
	-30^OC	86	110	62	93	52	84	41	68	36	57

Range

Type	Nominal output	Nominal Dimensions
TDIT-SR-10-AZ	10W/m @ 10^OC	9.75 mm x 5.5 mm
TDIT-SR-10-BZ	10W/m @ 10^OC	9.75 mm x 5.5 mm
TDIT-SR-15-AZ	15W/m @ 10^OC	9.75 mm x 5.5 mm
TDIT-SR-15-BZ	15W/m @ 10^OC	9.75 mm x 5.5 mm
TDIT-SR-20-AZ	20W/m @ 10^OC	9.75 mm x 5.5 mm
TDIT-SR-20-BZ	20W/m @ 10^OC	9.75 mm x 5.5 mm
TDIT-SR-25-AZ	25W/m @ 10^OC	9.75 mm x 5.5 mm
TDIT-SR-25-BZ	25W/m @ 10^OC	9.75 mm x 5.5 mm
TDIT-SR-30-AZ	30W/m @ 10^OC	9.75 mm x 5.5 mm
TDIT-SR-30-BZ	35W/m @ 10^OC	9.75 mm x 5.5 mm