Drain Pipe Heating Cable

Drain Pipe Heating Cables are uniquely designed to be laid inside pipes for draining water from thawing refrigeration equipments installed in cold rooms. They operate only during thawing cycles. In cold stores, after a certain time of operation, there is a buildup of ice in cooler fins and defrosting must take place.

Electric resistances are inserted between the fins to melt ice and water is collected and passed through a drain pipes for disposal. Some meters of drain pipes are inside the cold stores, so consequently the water may freeze again.

To avoid this problem,Drain Pipe Heating Cables is inserted in to the pipe. It is switched on only during the defrosting cycles.

Drain Pipe Heating Cables is available in predetermined lengths with cold tail – prefabricated & tested in a carefully controlled factory environment.

Features
Compliance	Standard EN 60335-1
Approvals	CE
Reliability	A uniquely designed hot to cold junction makes the termination robust, IP Rating: IPX7 RoHS, REACH & UV Resistant.
Flexibility	Silicon rubber cable makes them highly flexible and easy to install.
DIY	SHC-T with clear instruction manuals makes it user-friendly.
Custom Built	We also offer custom designs of a product to suit individual requirements. We can design for various dimensions, heat loads and voltages.

Specifications
Standard Wattage	10W/M, 20W/M, 30W/M, 40W/M, 50W/M, 230V
Maximum Wattage	50W/M, 230V
Standard Cold lead length	1M

# Thermopads reserves the right to modify the specifications in line with future improvements, updated standards or updated certifications

Drain Pipe Heating Cable

Features

Specifications

Not sure where to start? Try our products